JA Purity IV JA Purity IV
JA Purity IV JA Purity IV
  • About The Site
  • Blue Book
  • Public Velo Stuff
  1. You are here:  
  2. Home
  3. Velocette Documents
  4. MOV and MAC
  5. F131-3R Instruction Book 1937
  6. Adjusting The Front Brake

The knurled screw and locking ring are fitted near the front bottom spindle of the front forks. Undo the locking ring and screw up the knurled adjuster until the correct adjustment has been obtained and then lock up the lower knurled ring. After prolonged use, if the limit of adjustment has been reached, thin packing pieces may be inserted between the steel slippers on the ends of the brake shoes and the brake shoes. These pieces can be cut easily from a piece of ordinary thin tin plate.

Previous article: Adjustment Of Rear Wheel Bearings (Non-Detachable) Prev Next article: Adjusting The Rear Brake Next
Open menu
  • Velocette Documents
    • GTP Manuals
      • F40/5R GTP Instruction Book 1951
    • KSS, KTS Manuals
      • F236/4R Mk. II OHC Instruction Book 1950
      • F42/3R OHC Models 1925-1931 Instruction Book
    • MAC Manuals
      • F469/4R MAC Service Guide 1965
      • F466/2R MAC Owner's Handbook 1955
      • F50/7R MAC Rigid Frame Service Manual 1955
      • F50/4R Supplement
    • MOV and MAC
      • F131-3R Instruction Book 1937
    • MSS Manuals
      • F477 Owners Handbook 1954
    • Venom, Viper, MSS
      • F485/1R Owner's Handbook 1956
      • F484/9R Service Guide 1967
      • F484/11R Service Guide 1971
    • Valiant Manuals
      • F62-1R Service Manual